Special cables with hermetic junction for glove boxes
For experiments inside glove box, two different type of cables are available. For each case, a Jaeger feedthrough seals ensure tightness. Cables lengths inside and outside glove box is fixed to 1 m and 1.5 m respectively.
For SP-200 and SP-300
A Jaeger connector 25 pins ensures the hermetic junction. (Hole diameter to make in the glove box wall: 45 mm)
| Catalog No. |
Description |
| 094-101/6 |
Special cell cable with hermetic junction for SP-200 and SP-300 |
| Contents |
| |
Cable with electrometer in one side and 25 pins connector in the other side (length: 1 m) |
| |
Cable with DB-25 connector in one side and 25 pins connector in the other side (length: 1.5 m) |
| |
2 feedthrough seals one installed in the glove box wall the other dedicated to the channel board calibration outside the box |
For SP-50, SP-150, VSP, BiStat, VMP2 and VMP3
A Jaeger connector 12 pins ensures the hermetic junction. (Hole diameter to make in the glove box wall: 27 mm)
| Catalog No. |
Description |
| 092-23/5 |
Special cell cable with hermetic junction for SP-50, SP-150, VSP, BiStat, VMP2 and VMP3 |
| Contents |
| |
Cable with 2 mm connectors in one side and 12 pins Jaeger connector in the other side (length 1 m) |
| |
Cable with DB-25 connector in one side and 12 pins Jaeger connector in the other side (length 1.5 m) |
| |
1 feedthrough seal |
|
