|
New application note
- AN#31 - Fuel Cell Testing -
Part I: Overview and I/E characterizations
- AN#32 - Fuel Cell Testing -
Part II: EIS characterization
New instrument
- MPG2 - A research grade battery cycler
New accessory
New application note
- AN#30 - IMVS investigation on photovoltaic cell
New application note
- AN#29 - Ohmic Drop Part III: Suitable use of the ZIR techniques?
New accessory
New accessory
New accessories
New accessory
BH-1 battery holder
New instrument
SP-200 - A Unique combination of high performances and transportability
New option for the Fuel Cell Testers
To conduct long-term experiments such as fuel cell ageing, Bio-logic SAS has developed automation of humidifier water filling and the condenser water purge (PDF file). Three automation levels are proposed. Based on our standard FCT systems, a variety of options can be selected. A fully automatic option offers both humidifier filling and condenser purge. This option can be proposed with a new system but can also be adapted to existing units. This second option must be carried out at the factory. FC-lab® software manages automation.
Click here to access the Fuel Cell Tester page.
New library
Interactive Equivalent Circuit Library
New application notes
- AN#27 - Ohmic Drop: Part I: Effect on measurements
- AN#28 - Ohmic Drop:
Part II: Introduction to Ohmic Drop measurement techniques
New application note
AN#26 - Graphic Customization
New instrument
SP-300 - Breakthrough Technology -
A New Generation of super potentiostat
New application notes
- AN#25 -
Multi Pitting Corrosion
- AN#24 -
Photovoltaic Characterizations: Polarization and Mott Schottky
plot
- AN#23 - EIS
measurements on Li-ion batteries - EC-Lab software parameters
adjustment
(updated on June 9, 2009)
New accessories
Banana connectors, and alligator
clips
New accessories
New instrument
HCP-1005 - High current potentiostat with EIS for Li-ion, Ni-Cd, Ni-MH
battery testing
New accessory
Quartz Crystals Analyzer - QCA922
New distributor in Israel
New-Road Agencies
Contact: Eyal Shemer
e-mail: Eyal@NewRoad.co.il
Web:
http://www.newroad.co.il
Tel: +972-3-9028787
Fax: +972-3-9028788
Address:
11 ha'amal st. Afek business park
Rosh Ha'ayin 48092
Israel
New application notes
- AN#22 - Corrosion of
reinforced concrete
- AN#21 - Measurements of
the double layer capacitance
New application notes
- AN#20 - Pseudo
capacitance calculation
- AN#19 - EIS measurements
with multisine
New technical notes
 TN#23
- Graphic properties – Part II: Graph Representation definition- TN#22
- Graphic properties – Part I: Graph Style definition
New instrument
CLB-500 - An unique software
controlled 500 W (50 A/10 V) electronic load
New brochure
A new
booster & e-load brochure is available (PDF)
New application notes
- AN#18 - Staircase
Potentio Electrochemical Impedance Spectroscopy and automatic successive
ZFit analysis
- AN#17 - Drift correction
in electrochemical impedance measurements
EC-Lab® V9.5 - A new software release
A new release of EC-Lab® V9.5 is
available for download
EC-Lab® express V5.1 - A new software release
A new release of EC-Lab® express V5.19 is
available for download
New technical note
TN#21
- External device control and recording
New application note
AN#16 - Simultaneous
Impedance measurements on each element of a running cell stack
New distribution network
For over 9 years, Bio-Logic SAS has been marketing its products to the
electrochemistry market through an alliance partner.
Bio-logic SAS is now marketing its products directly to customers through its own
distribution network since October 1, 2007.
Please see our distributors web page.
New instruments
- SP-50 - Simplicity and Performance
- SP-150 - Simple and Powerful in a
versatile chassis
- FCT-50S - Compact Fuel Cell Test Station for 50A
cells
New application note
- AN#15 - Two questions
about Kramers-Kronig transformations
- AN#14 - ZFit and
equivalent electrical circuits
- AN#13 - VMP3 and Quartz
Crystal Microbalance coupling: mass measurement during a polypyrrol film
deposition
EC-Lab® development package V5.14
The free EC-Lab®
development package is for software developers who need to
integrate the control of the Bio-Logic potentiostats/galvanostats/EIS in an
OEM software.
New instruments
We have launched a complete new line of instruments with improved
specifications.
VSP, VMP3, HCP-803, EPP-400,
EPP-4000: from single potentiostat to 16 channel potentiostat, from 76
fA to 80A, with optional complex impedance measurements from 10µHz to
1MHz.
For a List of web's modification
Click here
|
